Water & Chemical Pumps
Self Priming Mono Block Pumps
Transmission Chain Centre one of the Top Dealers and a Leader for Manufacturer and Supplier of Self Priming Monoblock pumps for use with low Viscous Liquids in India.
Transmission Chain Centre offers the MDH & MDL Series of water and chemical mono block pumps. These are primarily used for low viscosity liquids and works on the principal of a self-priming centrifugal pump.
A Centrifugal pump has two phases of operation: First a priming mode and then a pumping mode. In the priming mode the pump works as a liquid-ring pump; i.e the rotating impeller generates a vacuum around the impeller’s movement area which draws air into the pump from the suction line then due to the pressure created inside the pump the water is pulled and then pumped into the outlet.
A self-priming pump is suitable for handling fluids that may be more corrosive or have different viscosities than of water like chemicals used for fertigation equipment or cleaning liquids.
There are multiple models available for Mono block pumps with different features and capacities contact us now to find the most suitable pump for your needs or we can also supply customised pumps as per requirements.
Our self priming mono block pumps have:
• Adapter & End shields made up of close grained cast iron which gives it high tensile strength.
• High Tensile Brass Impeller is used to give trouble free service. Motor windings are vacuum impregnated with synthetic varnish for higher moisture resistance.
• Superior quality mechanical seal for a long life and effective sealing against water leakage.
• Double Shielded pre-lubricated anti-friction ball bearings are fitted at both ends to withstand both radial and axial loads.
• Better insulating materials are used so that pump sets can withstand higher temperatures without failing.
• Self-Priming up to 7.5 meters at mean sea level.
• Fitted with Thermal Overload Protector (TOP).
• Sheet Metal Drip-proof Fan cooled motor body. (MDL-2SP, 4SP) Totally Enclosed Fan Cooled (TEFC) construction resists dust, moisture. (MDL-2TC, 4TC).
• Top mounted terminal box with covered capacitors.
Technical Specification
Model
Capacity in LPH at 1440 RPM
Suction & Delivery Size
Motor HP
3 kg/cm²
30 kg/cm²
FIG-S6
60
3/8" x 3/8"
0.25
1.00
FIG-S9
90
3/8" x 3/8"
0.25
1.00
FIG-S12
120
3/8" x 3/8"
0.25
1.00
FIG-A15
150
1/2" x 1/2"
0.25
1.50
FIG-A30
300
1/2" x 1/2"
0.25
1.50
FIG-A45
450
1/2" x 1/2"
0.25
2.00
FIG-A60
600
1/2" x 1/2"
0.25
2.00
FIG-B100
1000
3/4" x 3/4"
0.75
3.00
FIG-B150
1500
3/4" x 3/4"
0.75
3.00
FIG-B200
2000
3/4" x 3/4"
0.75
5.00
FIG-B250
2500
3/4" x 3/4"
0.75
5.00
FIG-C300
3000
1" x 1"
1.50
7.50
FIG-C450
4500
1" x 1"
1.50
10.0
FIG-C600
6000
1" x 1"
1.50
15.0
| Model | Capacity in LPH at 1440 RPM | Suction & Delivery Size | Motor HP | |
| 3 kg/cm² | 30 kg/cm² | |||
| FIG-S6 | 60 | 3/8" x 3/8" | 0.25 | 1.00 |
| FIG-S9 | 90 | 3/8" x 3/8" | 0.25 | 1.00 |
| FIG-S12 | 120 | 3/8" x 3/8" | 0.25 | 1.00 |
| FIG-A15 | 150 | 1/2" x 1/2" | 0.25 | 1.50 |
| FIG-A30 | 300 | 1/2" x 1/2" | 0.25 | 1.50 |
| FIG-A45 | 450 | 1/2" x 1/2" | 0.25 | 2.00 |
| FIG-A60 | 600 | 1/2" x 1/2" | 0.25 | 2.00 |
| FIG-B100 | 1000 | 3/4" x 3/4" | 0.75 | 3.00 |
| FIG-B150 | 1500 | 3/4" x 3/4" | 0.75 | 3.00 |
| FIG-B200 | 2000 | 3/4" x 3/4" | 0.75 | 5.00 |
| FIG-B250 | 2500 | 3/4" x 3/4" | 0.75 | 5.00 |
| FIG-C300 | 3000 | 1" x 1" | 1.50 | 7.50 |
| FIG-C450 | 4500 | 1" x 1" | 1.50 | 10.0 |
| FIG-C600 | 6000 | 1" x 1" | 1.50 | 15.0 |
Additional Information
Features
- Simple and Efficient design.
- Low noise.
- Wide capacity range.
- Easy to maintain.
- With relief valve design.
- High efficiency.
- Self priming pump.
Application
- Water supply for residential bungalows,
- Garages, apartments & flats,
- Dairies,
- Hotels, laundries, clubs.
- Hospitals etc.
- RO / water treatment plants
- Water circulation in solar heater systems
- Car washing & Small farms, farm houses
Related Products
